Arecont Vision AV8365DN-HB Bedienungsanleitung PDF herunterladen

A&E Specifications Rev 011012 AV8365CO/AV8365DN

425 E. Colorado Street, 7

Floor (818) 937-0700 Page 1

Glendale, CA 91205 www.arecontvision.com

AV8365CO 8 Megapixel H.264 Color 360° Panoramic IP Camera

AV8365DN 8 Megapixel H.264 Day/Night 360° Panoramic IP Camera

AV8365CO-HB 8 Megapixel H.264 Color 360° Panoramic IP Camera

w/ Heater & Blower

AV8365DN-HB 8 Megapixel H.264 Day/Night 360° Panoramic IP Camera

w/ Heater & Blower

Bid-Spec

1.0 Description

The AV8365 SurroundVideo

series network camera is a dual encoder (H.264 & MJPEG), 8 Megapixel

resolution, IP addressable 180 degree panoramic IP camera. The AV8365 SurroundVideo

camera line

provides an all-in-one solution with integrated four high sensitivity 2 megapixel sensors, 4mm lens, vandal

resistant dome enclosure with rated IP66 for water and dust protection, and optional heater/blower. Using

MegaVideo

technology, these cameras offer bandwidth and storage efficiency of up to 10X on average

over traditional megapixel counterparts

The AV8365 is a PoE (IEEE 802.3af) compliant camera with Color, Day/Night and optional heater &

bower configurations. Built with Arecont Vision’s proprietary massively-parallel MegaVideo

technology,

the AV8365 has the ability to output multiple image formats allowing the simultaneous viewing of the full

resolution field of view and regions of interest for high definition forensic zooming.

2.0 Bid Specification

The camera shall utilize four high sensitivity 2 Megapixel CMOS sensors each with 1/2” optical

format.

The camera shall integrate four 4mm megapixel IR corrected, F1.8, Horizontal Field of View of

96°.

The camera shall have vandal resistant dome enclosure with rated IP66 for water and dust

protection.

The camera shall contain both hard ceiling mount and surface mount and with optional pendant

mount, SV-CMT, wall mount, SV-WMT, flush mount adapter, SV-FMA, electrical box adapter,

MV-EBA or SV-EBA, pole mount adapter, MD-PMA , corner mount adapter, MD-CRMA, and

junction box adapter, SV-JBA.

The camera shall have a 2-axis easily adjustable gimbal with 360˚ pan 90˚ tilt for easy and

accurate positioning.

The camera shall have a +/- 10° tilt adjustment to locate the vertical position of each sensor.

The camera shall be H.264 (MPEG4, Part 10) compliant.

The camera shall have dual standard compression support with simultaneous streaming of both

H.264 and MJPEG formats.

The camera shall have multi-streaming support of up to 8 non-identical concurrent streams

(different frame rate, bit rate, resolution, quality, and compression format).

The camera’s bit rate control shall be selectable from 100 Kbps to 10 Mbps for each independent

stream.

The camera shall have privacy mask, the ability to select multiple regions of an arbitrary shape to

block the video. This feature will be supported both in HTTP and TFTP protocols, as well as the

on-camera web interface.

1 2 3 4 5

Quick-Spec 2